elitedali MSensor 8
The elitedali MSensor 8 is a batten mount PIR presence detector and photocell for lux…
Learn More
Why Choose eliteNotify?
Why Choose eliteNotify?
eliteNotify is LEAP’s native Niagara driver that transforms how building alarms and faults are delivered and managed. Unlike traditional systems that rely on GSM-based modems and SIM cards to send SMS alerts, eliteNotify uses internet gateways to reliably push notifications via SMS, WhatsApp, or email—with zero dependency on external hardware.
This means:
- No SIM cards to recharge
- No modems to configure or maintain
- No risk of missed messages due to poor mobile network coverage
With eliteNotify, critical alerts from lighting, HVAC, energy, or safety systems are routed instantly to the right person, based on predefined rules and escalation logic. Whether it’s a facility engineer, an outsourced maintenance team, or a remote operator, everyone stays informed—always.
The LEAP Advantage
The LEAP Advantage
✅ Native to Niagara – Works directly within the Niagara Workbench and BMS logic
✅ Internet-Based Delivery – Reliable and location-independent
✅ Role-Based Routing – Targeted alerts for faster response and accountability
✅ Fully Configurable – You define what matters, when, and to whom
✅ Scalable – Supports multi-building, multi-team operations
✅ Audit-Friendly – Logs and tracks all notifications and responses
Feature Overview
eDIM kit
MultiDrop transforms any controller running Niagara Software Framework into a smart IoT convergent lighting commissioning and controls product.
DALI Power Supply
Power Supply for DALI networks - used globally to manage, automate, and controls the lighting management systems.
eDIM
Each licensed kit, comprising software and interface module, enables the connection of a single DALI channel, circuit, or network of up to 64 DALI devices
Niagara Driver Software Specifications
Software driver when installed on JACE with a valid license, enables JACE to communicate with any DALI device like Light fixtures or Sensors on the network. Can work with any DALI light fixtures.
View Specifications
- Follows all development guidelines and standards set by Niagara Software Framework
- Native Niagara driver for Niagara4 version 4.1 onwards
- Uses device modelling so NO I/O mapping, labelling or enumeration checking required
- Capability to create simple and complex control strategies for a DALI lighting system via specific
lighting control components “kitControl” library - Integrates with all Niagara services including but not limited to reporting, tagging, scheduling, alarming etc.
- Supports a full 64 Open Standard DALI IEC 62386 devices on a single DALI network
Niagara Lighting Control Component Software
The “kitControl” library of licensed software control components allow System Integrators to quickly, simply and reliably create lighting control strategies that reduce energy usage and create a modern comfortable environment.
View Control Components
- Constant Light Controller Direct
- Occupancy Controller Direct
- Occupancy Controller Command
- Scene Select Command
- Simple Command Controller
- Simple Direct Level Controller
- Occupancy Timeout
- Occupancy Concentrator
- Lux Concentrator
- Scene Dimmer Direct
- Scene Dimmer Override Direct
- On-Off Dimmer Override Direct
- Single Switch Override Direct
DALI Multi Sensors
Range of sensors are MultiSensors, functioning as a presence detector, the unit returns occupancy data to the DALI network. The photocell provides a lux level measurement value to the DALI network.
MSensor 2
The low cost MultiSensor2 combines presence/absence detection with daylight measurement for DALI Open Standards intelligent lighting networks.
MSensor 9
The MSensor 9 luminaire mount high bay PIR presence detector provides exceptionally sensitive and long-range detection and photocell for lux level measurement.
MSensor 7
It is ideal for integration into equivalent IP rated luminaires and external lighting applications such as car parks and integration into street lights.
DALI Accessories
We continue to partner with all DALI product manufacturers to ensure the widest range of DALI products is available to the global Niagara community that is suitable for use with Niagara Software.
DALI Network Repeater
This DALI Network Repeater Unit enables a single DALI network of up to 64 devices to be extended from 300m (984ft) to 600m (1,968ft) in length.
Compact Dali Relay
These compact DALI relays are for use with non-dimmable ballasts in a DALI lighting control solution. In addition they may be used for control of suitable non lighting loads.
USB DALI Network Monitoring
This USB DALI network interface allows low level monitoring of DALI traffic on an elitedali network for troubleshooting purposes.
The Multidrop Connectivity Kit
Commission, Control, manage, monitor and analyse any intelligent addressable DALI light fixtures, in real-time, from anywhere.
The Multidrop connectivity kit transforms suitable control platforms running the Niagara Framework to seamlessly connect to DALI networks directly available RS-485 serial ports.
Each connectivity kit consists of:
- Interface hardware module - eDIM kit
- Native Niagara DALI interface driver software
- Niagara lighting control component software
Enables full addressing, commissioning, control, management, visualization, and analytics of one DALI network of upto 64 DALI devices
eDIM kit
MultiDrop transforms any controller running Niagara Software Framework into a smart IoT convergent lighting commissioning and controls product.
DALI Power Supply
Power Supply for DALI networks - used globally to manage, automate, and controls the lighting management systems.
eDIM
Each licensed kit, comprising software and interface module, enables the connection of a single DALI channel, circuit, or network of up to 64 DALI devices
Niagara Driver Software Specifications
Software driver when installed on JACE with a valid license, enables JACE to communicate with any DALI device like Light fixtures or Sensors on the network. Can work with any DALI light fixtures.
View Specifications
- Follows all development guidelines and standards set by Niagara Software Framework
- Native Niagara driver for Niagara4 version 4.1 onwards
- Uses device modelling so NO I/O mapping, labelling or enumeration checking required
- Capability to create simple and complex control strategies for a DALI lighting system via specific
lighting control components “kitControl” library - Integrates with all Niagara services including but not limited to reporting, tagging, scheduling, alarming etc.
- Supports a full 64 Open Standard DALI IEC 62386 devices on a single DALI network
Niagara Lighting Control Component Software
The “kitControl” library of licensed software control components allow System Integrators to quickly, simply and reliably create lighting control strategies that reduce energy usage and create a modern comfortable environment.
View Control Components
- Constant Light Controller Direct
- Occupancy Controller Direct
- Occupancy Controller Command
- Scene Select Command
- Simple Command Controller
- Simple Direct Level Controller
- Occupancy Timeout
- Occupancy Concentrator
- Lux Concentrator
- Scene Dimmer Direct
- Scene Dimmer Override Direct
- On-Off Dimmer Override Direct
- Single Switch Override Direct
DALI Multi Sensors
Range of sensors are MultiSensors, functioning as a presence detector, the unit returns occupancy data to the DALI network. The photocell provides a lux level measurement value to the DALI network.
MSensor 2
The low cost MultiSensor2 combines presence/absence detection with daylight measurement for DALI Open Standards intelligent lighting networks.
MSensor 9
The MSensor 9 luminaire mount high bay PIR presence detector provides exceptionally sensitive and long-range detection and photocell for lux level measurement.
MSensor 7
It is ideal for integration into equivalent IP rated luminaires and external lighting applications such as car parks and integration into street lights.
DALI Accessories
We continue to partner with all DALI product manufacturers to ensure the widest range of DALI products is available to the global Niagara community that is suitable for use with Niagara Software.
DALI Network Repeater
This DALI Network Repeater Unit enables a single DALI network of up to 64 devices to be extended from 300m (984ft) to 600m (1,968ft) in length.
Compact Dali Relay
These compact DALI relays are for use with non-dimmable ballasts in a DALI lighting control solution. In addition they may be used for control of suitable non lighting loads.
USB DALI Network Monitoring
This USB DALI network interface allows low level monitoring of DALI traffic on an elitedali network for troubleshooting purposes.